10 Best TaylorMade Drivers | Buyer’s Guide & Product Reviews | 2020
A quality TaylorMade driver will significantly improve your prowess on the golf course. Long gone are the days when golfers were limited to compact driver heads with little in the way of advanced technologies.
The current range of drivers from TaylorMade offers a huge variety of innovative technologies, from drivers that score top marks for forgiveness to more cutting-edge enhancements to meet the most specific of play requirements.
The classic M2 is often considered the best golf driver for those shopping on a budget, while the more advanced M6 driver is the way to go for proficient golfers with more exacting requirements. Struggling to decide on the Best Driver for you?
Below, you will find our breakdown of some of the finest driver models TaylorMade currently has to offer. From the best driver for high handicaps to rescue drivers designed to get you out of a very tricky spot, you are bound to find something that fits the bill.
We will break down key features of all driver models in our list, along with pros and cons for each option. When reading through our guide make sure you consider your own individual requirements carefully as some benefits might not necessarily align with your own individual needs.
Product Reviews on 10 Best Taylormade Driver in 2020
Read on our pick of 10 of the Best TaylorMade Drivers currently available on the market.
The TaylorMade 2017 M2 Driver builds on the success of the original M2 with plenty of subtle improvements that will significantly improve your performance.
– Multi-material composition
– Deeper Sound Pocket
– Crown-to-body craftsmanship
The TaylorMade 2017 M2 boasts a brand new multi-material construction that reduces excess weight, allowing for the centre of gravity to be repositioned lower into the driver head. A 6-layer carbon crown and 911 skeletal Titanium body frees up even more weight, especially in the back.
Geocoustic technology also comes as standard here. The advanced sole shaping found here also includes a recessed toe panel that allows for expansion of the club face, providing you with added levels of forgiveness. The expanded face also allows for the inclusion of external sound ribs.
The deeper sound pocket is three times more active than what you would find with the original M2. This makes for increased levels of flex and forgiveness across the entire club face. This allows for higher launch and low spin across your shots, granting you greater distances.
Superb craftsmanship from crown to body can be expected here. Consistent aesthetics and performance across all drivers can be looked forward to. Other premium features include the Fujikura XLR8 Pro Stock shaft, dual feel grip, as well a lightweight aluminium sleeve with 4-degree loft sleeve and 12 settings.
– Plenty of advanced technology on offer
– Superb sound and feel
– Impressive launch
– Wide range of lofts available
– High price tag for a single driver
– Advancements on original M2 may be too slight to justify purchase
The 2017 M2 from TaylorMade definitely improves upon the original with a slate of welcome advancements, but the significant price tag may deter the average golfer from upgrading.
The TaylorMade M3 showcases significant upgrades on previous drivers from the popular manufacturer with the addition of innovative Twist Face technology.
– Twist Face curvature
– Hammerhead slot
If you are looking for a user-friendly driver that will hold up well on the course, the TaylorMade M3 Driver 440cc is well worth considering.
This affordable 2018 model boasts some seriously impressive technology to improve your shots. The face is specially designed to deliver straighter, more consistent shots from your swings.
The innovative face technology boasts a curved design that serves to correct the angles of any off-centre strikes. This reduces the amount of spin on the ball, making for straighter trajectories.
If you are looking to boost your confidence when you play and get back to the green more accurately, this is the way to go.
You can also enjoy the inclusion of the Hammerhead sole slot here, making the M3 a particularly adjustable choice. The outer portions of the slot are reinforced, allowing for a lighter face that is far more flexible than the standard.
This makes for a much larger sweet spot to make your golfing strikes more consistent. The Y-track system is another handy extra.
This intuitive system lets you move weight for personalised ball flight performance.
– Consistently high launches and low spin
– Wide scope of adjustments
– Twist Face technology makes this a forgiving choice
– Relatively expensive
– Adjustments can be complicated
– Feel and sound is sometimes compromised
This is definitely an improvement over the M2, but the complexity involved with adjustment might deter the less experienced golf player.
The TaylorMade M4 Draw Driver is an easy choice for the golfer looking to improve their game. It is user-friendly, very forgiving and incredibly easy to align.
– Hammerhead 2.0 slot
– Geocoustic technology
– Advanced face curvature
The TaylorMade M4 Draw Type Driver offers plenty of practical features to improve your performance. The innovative face curvature includes a corrective face angle for off-centre hits. This reduces the impact of side spin, letting you deliver straighter shots, every time.
There is also more loft in the high toe and less loft in the low heel, allowing you to achieve more consistent spin. The Haammerhead slot is another welcome addition. The reinforced outer sections of the slot allow the face to remain lightweight and flexible, giving you a much larger sweet spot.
The flexible centre slot is particularly useful for increasing your ball speeds with lower shots, while also bringing down the amount of spin.
Geocoustic technology is also on hand here, with the superior shaping giving you a more solid feel and crisper sound feedback. With less sound volume, you have a larger and more forgiving face to enjoy. The aesthetics have been carefully designed to improve playability.
The two-tone crown gives you a face angle that appears more open, meaning the face appears more closed upon impact. A significant amount of weight has also been redistributed to the heel portion of the head, making this a must for those after a driver with draw bias.
– Very easy to use
– Twist Face technology makes for high levels of forgiveness
– Easy alignment thanks to aesthetics
– Relatively expensive
– High levels spin on mishits
– Lightweight stock shaft not ideal for faster swings
The TaylorMade M4 Draw Driver is definitely worth considering if you are looking for user-friendly club that is easy to align and control.
The TaylorMade M4 Rescue #4 Hybrid is essential for getting you out of tricky situation and significantly improves upon the 2017 M2 Rescue Hybrid.
– Split internal weights for added forgiveness
– Speed Pocket Technology
– Geocoustic technology
The TaylorMade M4 Rescue #4 is an ideal choice of rescue driver for those looking to get out of compromising situations on the course.
The M4 Rescue boasts innovative details like split internal weights to provide enhanced levels of forgiveness. These weights will also promote increased ball speeds, regardless of what part of the face you make contact with. This is very useful for those golfers seeking to hit centre more consistently.
The Speed Pocket technology also means that ball speeds are maintained, even with low-face shots. The Speed Pocket also provides you with added levels of forgiveness, while ensuring distances are more consistent.
Geocoustic technology further enhances the M4 Rescue.
No matter what lie you are looking to play from, you can look forward to a great feel and easier shots. You also have a choice of shafts here, ensuring you have a perfect setup for playing your best. You can choose between the Fujikura Atmos Shaft and Stiff Flex Graphite Shaft to ensure you have a driver tailored towards your playing preferences.
– Great choice for those looking to reduce their handicaps
– Good feel and very forgiving
– Huge gains over the TaylorMade M2 Rescue 2017
– High price tag
– No potential for adjustments
If you are long overdue an upgrade on your current rescue driver, this hybrid is definitely worth considering. The limited scope of adjustment makes it more suited toward the experienced player, but a little practice makes perfect.
The TaylorMade M5 Tour 435cc is a great choice of driver for those looking for a more forgiving club, plenty of adjustments and greater distances.
– Speed Injected technology
– Twist Face and Inverse T-Track
– Hammerhead 2.0 slot
There is plenty of premium features on offer with the TaylorMade M5 Tour. Revolutionary.
Twist Face curvature with a corrective face angle means you can enjoy better results, even from off-centre hits. The Twist Face technology also serves to reduce the amount of side spin on your shots, giving you greater trajectories as standard.
The Twist Face shifts more loft in the high-toe, while delivering less loft in the low-heel. This delivers more consistent levels of spin, even if you are prone to off-centre hits. The Hammerhead 2.0 slot effectively combines with the Twist Face curvature to provide you with a larger sweet spot.
The centre of the slot also increases ball speed at the lower sections of the face, while excess spin is minimised to ensure you cover greater distances.
The inverse T-Track brings together two 10-gram weight that can be readily adjusted at the bottom of the club head. This lets you adjust your spin or ball flight trajectory with ease.
The inverted nature of the track makes for more expanded weighting options, lowering the centre of gravity and enhancing levels of forgiveness.
– A good option for proficient golfers
– Very impressive ball speeds and distance
– Easily adjusted for enhanced forgiveness
– Smaller profile may put off less experienced players
– No huge gains on the M3 model
– Relatively pricey
If you are a more experienced golfer with the money to spare, the TaylorMade M5 is well worth considering for its intuitive adjustments and speed and distance potential.
The TaylorMade M6 Driver is a solid all-rounder that offers plenty of forgiveness, high ball speeds and a generous sweet spot.
– Speed Injected for optimised COR
– Twist Face technology
– Hammerhead 2.0 slots
The TaylorMade M6 is definitely worth your time if you are a more proficient golfer looking to boost your performance.
Each driver head is injected with tuning resin to enhance COR across the entire driver face. The Speed Injection process has been finely-tuned to give you the best results in ball speed and distance. Innovative Twist Face design also comes as standard here.
The face curvature boasts a corrective face angle to improve results, even with off-centre hits. The face profile will reduce the amount of side spin you experience, while also delivering straighter shots as standard.
The aerodynamic carbon sole design is also worth a mention here. The aerodynamic shaping has been specially designed to increase the speed of your club head, bringing you greater ball flight distances when you connect with the ball. The Hammerhead 2.0 slot also brings plenty to the table.
This flexible slot works effectively alongside the twist face to provide you with a much larger sweet spot. This preserves ball speeds, even when you hit off-centre. Tour-inspired aesthetics also ensures the m6 makes a welcome addition to your bag.
– Corrective face curvature for straighter shots
– Aerodynamic design for enhanced ball flight
– Hammerhead 2.0 slot makes for a bigger sweet spot
– Best reserved for the more proficient golfer
– High price tag might deter the novice
If you have the budget to play with, the TaylorMade M6 is worth considering if you are looking for increased speeds, greater distances and more consistent results.
The TaylorMade M6 is a draw-biased driver designed that scores top marks for forgiveness, high ball speeds and versatility.
– Twist Face Technology
– Aerodynamic Carbon Sole
– Draw-Biased Design
The TaylorMade M6 is without doubt one of the best drivers currently available from this first-rate golfing brand. With a wide range of top-tier spec on offer, you will quickly see improvements to your game.
This driver has been optimised for speed. Each and every head has been speed tested and then injected with tuning resin to improve COR across the entire club face.
You will also find Twist Face technology as standard here. This innovative face curvature adds a corrective angle to the driver head itself, helping you out of a tricky spot should you make off-centre connections with the ball. This technology also reduces the amount of spin on the ball, while generally producing straighter trajectories.
The M6 also offers an aerodynamic carbon sole design with a so-called inertia generator. The refined shaping increases the overall speed of your club head, giving you greater distances with every swing.
The carbon sole construction also means that more mass can be placed in a lower position toward the rear of the club head, granting you optimal MOI and a lower overall centre of gravity. The draw-biased design of the M6 will also appeal.
The two-tone aesthetics have been designed to ensure the face angle appears more open, giving you a more closed face come the moment of impact.
– Draw-biased design makes for easier alignment
– Superb speed and distance credentials
– Very forgiving and easy to handle
– Lack of adjustment potential
– Relatively high price tag
If you are looking for a forgiving driver that is incredibly easy to handle, not to mention faster ball speeds and a more generous sweet spot, the M6 from TaylorMade should fit the bill nicely.
The TaylorMade SIM Driver is a great option for those looking to get a handle on spin and enjoy plenty in the way of adjustments.
– Speed Injected Twist Face
– Inertia Generator
– Advanced Aerodynamics
The TaylorMade SIM Driver will make a welcome addition to your club collection.
The popular golfing manufacturer has gone to great lengths here to deliver a driver that flies in the face of convention. As with other options in the SIM range, the base SIM model brings together superior launch conditions, enhanced MOI performance and the best in aerodynamic design to deliver a driver that will perform well, every time. You can also look forward to superior shaping thanks to the multi-material construction, making this a particularly effective choice.
Compared to other drivers, the TaylorMade SIM Driver has a particularly large face. This not only increases your overall sweet spot, but also gives you a club that is considerably more forgiving than other options on the market.
The SIM has been optimised for speed and forgiveness in mind, with an adjustable centre of gravity allowing to fine-tune the club to your liking.
– Good levels of forgiveness
– Plenty of adjustment potential
– Ideal choice for those looking for a longer driver
– Smaller club face and sweet spot might put off less experienced players
– More expensive than premium drivers like the Max and Max D
The more experienced golfer should find plenty to love about the TaylorMade SIM Driver, with plenty of adjustment possible and impressive levels of forgiveness.
The TaylorMade SIM Max is the way to go if you are looking for first-rate forgiveness and to unlock explosive distance potential.
– Aerodynamic Asymmetric Sole
– Inertia Generator
– Speed Injected Technology
There is superb spec on offer with the TaylorMade SIM MAX. A revolutionary new shape and aerodynamic asymmetric sole serves to increase the speed of the club head, giving you greater ball speeds and distances as standard. Rear weighting also creates a high moment of inertia to bring you greater levels of forgiveness.
Speed injected technology also provides intelligently optimised COR. This serves to improve ball speed across the entire face. Twist Face technology is also on offer here. The corrective face angle overcomes the issue of off-centre hits, yielding straighter shots, every time.
A multi-material composition makes for a club head design where the weight has been positioned with the utmost precision. This makes for a low centre of gravity and high moment of inertia.
A 2-degree loft sleeve gives you plenty of freedom when it comes to tailoring your club to your playing preference. In fact, you can optimise the SIM MAX to fall in life with your trajectory requirements and preferred and face angle options.
– Plenty of trajectory and face angle adjustments possible
– Greater ball speeds and distances
– Corrective face angle helps minimise off-centre hits
– Relatively expensive
– Experienced golfers might prefer the SIM MAX D
The TaylorMade SIM MAX will prove a perfect fit for the more experienced golfer looking for a club that is forgiving and allows for precise control.
The TaylorMade SIM MAX D Driver boasts an incredibly large face and draw-biased aesthetics that the more proficient golfer will definitely appreciate.
– Injected Twist Face
– Aero Speed Pocket
– Carbon Toe Panel
The TaylorMade SIM MAX D is the top-tier offering from the SIM line-up. The SIM MAX D is particularly suited toward the golfer who finds themselves struggling with slices.
The club face is significantly larger than comparable drivers, with a design that is enhanced with draw-biased aesthetics. An injected Twist Face improves your performance should you struggle to make a centred hit. Aero Speed Pocket technology is also on hand to optimise your ball speeds, even with low strikes.
The inertia generator has also been rotated here to enhance airflow and boost your performance. The carbon toe panel is also a welcome addition, shifting weight from the head.
The significantly larger face of the SIM MAX D makes this driver a particularly forgiving choice. This is also one of the best golf driver options on this list in terms of adjustments.
The sliding weight allows you to make quick and easy adjustments to the centre of gravity so you can tailor your driver to meet your individual playing needs.
– Large face makes for a very forgiving club
– Easily adjusted
– Multiple lofts available
– Expensive compared to other SIM models
– Only a slight difference between this and the SIM MAX
The TaylorMade SIM MAX D will appeal to the more experienced golfer looking for draw-biased design and first-rate functionality.
TaylorMade has definitely established itself as leading authority when it comes to drivers. The sheer scope of technologies and innovative design available makes the manufacturer one of the best on the market.
TaylorMade’s M series is without doubt the cream of the crop for most golfers. While the likes of the TaylorMade M6 Driver (460cc) will set you back a considerable amount, the boost to your performance is well worth the investment. However, if you are prepared to delve further back into the TaylorMade catalogue, you will find plenty of budget-friendly options.
In our line-up, we have only skimmed the surface of what you can currently find available from TaylorMade. If you are still unsure of which option is for you, take some time to browse the market for other impressive models like the TaylorMade R9 Driver or some of the other drivers in our buyers guide of Best Driver for Slice.
No matter whether you opt for something on the expensive side or hedge your bets with a budget-friendly model, there is no doubt that a quality TaylorMade driver will dramatically improve your game.